Bathtub Refinishing In Seattle, WA

Seattle Offers Bathtub Refinishing

Bathtub refinishing is a great way for giving your bathroom a makeover without having to outlay a lot of money. Don't be confused about the term bathtub resurfacing. It means exactly the same as tub refinishing or tub reglazing and makes old stained tubs look just like new. If you're thinking about sprucing up your bathroom, a cost effective solution is to have your bathtub refinished by Bathtub Makeover Wizards in Seattle. The information about bathtub refinishing in Seattle below will give you an insight into why so many choose to do this update and what the process of refinishing is like.

Refinishing Made Easy by Bathtub Makeover Wizards in Seattle

It always pays to do your due diligence prior to embarking on a home improvement project such as tub refinishing in Seattle. The process of tub reglazing consists of applying a specialized coating to the top of a tub to cover up any blemishes that were previously present. While this sound simple, it does require a steady hand. Bathtub Makeover Wizards in Seattle has the knowledge of the application process to ensure the coating is seamlessly applied. Any silicone caulking that overlaps onto the area to be resurfaced is removed. Additionally we also remove any bathroom drain covers such as hair strainers.

Techniques Used For Bathtub Refinishing in Seattle

It's essential that the old tub is cleaned from any old grease and grime. Do this with a powerful cleaner followed by sanding with 115-grit sandpaper. The next step is to clean and dry the tub before washing with acid (hydrofluoric). Rinse again before lightly sanding again with 120-grit paper. Yet again the bathtub needs to be rinsed and dried before filling in any blemishes with a body filler and then applying a coat of epoxy paint. Last but not least, the glaze will be applied using instructions from the manufacturer. In Seattle only the highest quality glaze is used.

Seattle Tub Reglazing Company Says DIY Not Recommended

If you are good at DIY you can attempt to resurface your bathtub yourself. Unfortunately there's no guarantee you will have a good result. It is a difficult project for those who don't have the right experience with home projects. If you want to avoid further damaging the tub or spending time on a project that won't turn out right in the end, it's recommended to hire a contractor in Seattle. To guarantee that your bathtub is refinished professionally, contact Bathtub Makeover Wizards in Washington for a free quotation.

Bathtub Makeover Wizards in Seattle Use Quality Coatings

Skimping on the quality of topcoat and primer coatings used in tub refinishing is a false economy. They can result in a tub that won't have a long life before they need replacing. Each of these coatings will influence the results and ensure the tub looks pristine again once it's complete. The benefit of using an experienced local contractor for bathtub refinishing in Seattle is that they know exactly which coatings work best., If you are doing it yourself, make sure you get the right coating to get a good finish.

Reglazing a Bathtub in Seattle Need Not Take Long

It would almost certainly take you a number of days to do your own bathtub refinishing. Tub reglazing in Seattle would usually take a reputable contractor one day or less if less preparation is needed., Badly marked tubs need a lot of surface cleaning before they can be resurfaced and therefore take much longer to complete the job. Unless there are any unexpected problems a typical bathtub refinished in Washington should be able to be used 24 hours after drying.

Longer Bathtub Life Promises Seattle Refinishing Company

If a contractor cuts corners to offer a cheaper price then quality will be compromised and tub life will be reduced. This is a good reason to have your tub refinishing in Seattle done by qualified contractors from Bathtub Makeover Wizards. Following recommended maintenance procedures will ensure you get the longest life from bathtub resurfacing, which is typically over 7 years. It's possible to reglaze a bathtub for a second time provided the tub has not been badly damaged.

Range of Bathtub Resurfacing Colors From Bathtub Makeover Wizards

White is still one of the most popular colors when reglazing a bathtub. However it's fairly common after bathroom resurfacing to get colors to match your tub with any new bathroom fittings or accessories. Contractors such as Bathtub Makeover Wizards usually stock coatings from their preferred manufacturers or suppliers. This means that your color choice after bathtub resurfacing may be restricted. With a variety of options, it's much easier for homeowners to pick and choose the ideal look for their restroom.

After Bathtub Resurfacing Clean Regularly

Contact Bathtub Makeover Wizards in Washington for details on essential maintenace. Neglecting to maintain your refinished bathtub will soon result in your tub loosing it's silky smooth finish. Always use a tub cleaner that is made specifically for that purpose for regular cleaning. It's important to avoid abrasive cleaners and sponges, as these can damage the delicate coating that makes the tub look new. Leaving soap or any other objects in the tub may be harmful to the recently applied glazing. Always remove everything from your bathtub when you are finished bathing.

Seattle Bathtub Reglazing Advantages

* Home Improvement - A recently refinished bathtub not only adds value to your home, it also makes it a lot easier to sell if you looking to do that. * Cost Savings - Tub replacement is much more expensive than simply reglazing a bathtub. * Shorter Project - Not to mention you have to spend time to find the new tub, which may require several trips to different stores. Reglazing a bathtub is an option worthwhile considering. * Bathroom Makeover – Reglazing a bathtub leaves a shiny and beautiful surface coating that will contribute to a more updated look throughout your bathroom.